Korg Pa3XLe, Руководство пользователя, Страница: 211 / 472

207 Sound
Digital Drawbars page
Re
fe
rence
Digital Drawbars page
DIGITAL DRAWBARS are different from ordinary Sounds.
Their parameters are not saved as a new Sound, but can be saved
to a Performance. Therefore, when entering the Digital Draw-
bars page, the MENU button is disabled.
Note: In Style Play and Backing Sequence mode, only a Digital
Drawbar Sound is available for the Keyboard tracks, and one for
the Style tracks. Save them to a Performance (see “Write Perfor-
mance dialog box” on page 132).
Note:
In Song Play mode, there is a Digital Drawbars Sound for
the Keyboard tracks, one for Song tracks 1-8, another one for Song
tracks 9-16.
Note: In Sequencer mode there is a Digital Drawbars Sound for
Song tracks 1-8 and one for Song tracks 9-16.
When you select the special DRAWBARS Sound in the Organ
Sound bank, the Drawbars Setting page appears, and the current
setting is assigned to the selected track.
To edit the Drawbars, drag the virtual sliders in the display. As
an alternative, touch a slider and drag it on the display, or use the
VALUE DIAL controls to change its value.
Each foot refers to the pipe length in a pipe organ, in which the
sound is produced by pipes of different length. Longer pipes
mean a lower sound; therefore, the 16’ drawbar produces the
lowest pitched sound, while the 1’ drawbar produces the highest
pitched sound.
Percussion/Rotary tab
Percussion adds a percussive sound to the attack segment of the
organ sound. Rotary adds the effect of a rotating speaker.
On/Off
Use this parameter to turn percussion on or off.
Foot
Use this parameter to select a percussion register.
4’ Percussion added to the 4’ foot.
2
2
/
3
’ Percussion added to the 2
2
/
3
’ foot.
Mode (Percussion Mode)
This parameters lets you decide if the percussion sound has to be
triggered on the first note of a group of held notes, or to all notes.
All The percussive attack is played on all notes of a
chord.
1st The percussive attack is played only on the first
note of a chord or a group of held notes. Release
all notes to trigger the percussion again.
Volume (Percussion Volume)
Level of the percussive sound.
0…99 Level.
Length ( Percussion Length)
Decay speed of the percussive sound.
0…99 Decay time.
Rotor On/Brake
Touch this button to start or stop the rotating speaker.
Speed Slow/Fast
Touch this button to switch the rotating speaker’s speed (from
slow to fast, or vice-versa).
Note: The “Rotor On/Brake” and “Speed Slow/Fast” parameters
are only available when a Rotary effect has been assigned to one of
the FX slots (effects #63 or #133).
Tone/Noise tab
Tone is the timbre of the sound. Noises are mechanical noises
from the keyboard and the tonewheels.
Wave (Drawbar Wave)
Tone
Waveshape of the drawbars, producing the base timbre.
Mellow A mellow-sounding synthetic wave.
Hard A harder-sounding synthetic wave.
Leakage
Leakage from adjacent tonewheels, making the sound richer.
Key On
Noise of the keypress.
Key Off
Noise of the key release.
Pa3XLe User Manual v100 (English).book Page 207 Thursday, May 29, 2014 5:42 PM