Korg Pa3XLe, Руководство пользователя, Страница: 131 / 472

127 Style Play
Keyboard/Ensemble > Key/Velocity Range
Re
fe
rence
Keyboard/Ensemble > Key/Velocity Range
This page lets you program a key and dynamic (velocity) range
for each of the Keyboard tracks.
Key range is useful to create a set of Keyboard tracks playing in
different zones of the keyboard. For example, you may have
French Horns and Woodwinds playing in the center range of the
keyboard, while only Woodwinds play on the higher range.
Velocity range is useful to create a sound made of up to three
dynamic layers, assigning each of the Upper tracks to a different
dynamic range.
As an example, you may assign the El.Piano 1 Sound to the
Upper 1, and the El.Piano 2 Sound to the Upper 2 track. Then,
set Upper 1 to [Bottom=0, Top=80], and Upper 2 to [Bot-
tom=81, Top=127]. The El.Piano 1 will play when playing softer,
the El.Piano 2 when playing louder.
Top/Bottom Key (Key Range)
This parameter pair sets the Top and Bottom key range for the
track.
C-1…G9 Selected key.
Top/Bottom Vel. (Velocity Range)
This parameter pair sets the Top and Bottom dynamic range for
the track.
0 Lowest velocity value.
127 Highest velocity value.
Play/Mute icon
Track’s play/mute status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Keyboard/Ensemble > Ensemble
This page lets you program the Ensemble function. This func-
tion harmonizes the right-hand melody (played in realtime)
using the recognized chords played by the left hand.
The Ensemble works both in the Style Play and the Song Play
modes. Chords are always recognized in the Lower Chord Scan
area.
Note: The Ensemble function only works when the keyboard is in
Split mode.
Ensemble
Harmonization type.
Duet Adds a single note to the melody.
Close Adds a closed-position chord to the melody.
Open 1 Adds an open-position chord to the melody.
Open 2 As the above, but with a different algorithm.
Block Block harmonization – very typical of jazz music.
Power Ensemble
Adds a fifth and an octave to the melody, as heard
in hard rock.
Third Up This option adds a third over the melody note
(depending on the recognized chord).
Fourths LO Typical of jazz, this option adds two perfect
fourths under the melody.
Fourths UP As the above, but with notes added over the mel-
ody.
Fifths This adds two fifths below the original note.
Octave Adds an octave below to the melody.
Dual This option adds to the melody line a second
note, at a fixed interval set with the “Note”
parameter. When selecting this option, a transpo-
sition value appears (-24…+24 semitones to the
original note).
Brass Typical Brass section harmonization.
Reed Typical Reed section harmonization.
Pa3XLe User Manual v100 (English).book Page 127 Thursday, May 29, 2014 5:42 PM