manualshive.com logo in svg

Korg M3, Руководство по параметрам

Поделиться
Скачать
Korg M3 Скачать руководство пользователя страница 245

SEQ P5: MIDI Filter 5–1–1: –1 T01–08, 5–1–2: –1 T09–16

235

SEQ P5: MIDI Filter

Here you can select whether or not to apply filtering to the 
MIDI data received by MIDI tracks 1–16. For example even 
if two tracks are receiving the same MIDI channel, one can 
be set to respond to damper pedal activity while the other 
does not.

These MIDI filter settings have no effect on the MIDI 
messages that have already been recorded.

These settings affect the MIDI messages that are 
transmitted when you adjust program, pan, volume, 
portamento and send 1/2 parameters of a track whose 
Status

 (Seq 3–1(2)c) is set to BTH, EXT, or EX2.

On (checked):

 Reception of MIDI data is enabled. Tracks 

whose Status (Seq 3–1(2)c) is INT or BTH will receive these 
types of MIDI messages on their respective channels. The 
type of effects that are checked will be applied to the 
program of each track when the M3’s controllers are 
operated or when MIDI data is received. (The effect 

dynamic modulation function is not affected by these 
settings.) 

Settings that regulate MIDI transmission/reception of the 
M3 itself are made in MIDI Filter (Global 1–2b).

If the user-assignable controllers that can be filtered in the 
MIDI Filter 1–4 and 2–5 pages are set to MIDI control 
changes, filtering will be performed for these control 
changes. In this case, any control change filtering that is 
being performed in the MIDI Filter 1–1 to 1–3 pages will be 
given priority. Furthermore, if the same control change is 
assigned to multiple controllers for which there are filter 
settings in the MIDI Filter 1–4 and 2–5 pages, checking any 
one of these will enable that control change.

Off (unchecked):

 Reception of MIDI data is disabled.

Note: MIDI CC# = MIDI control change message numbers.

SEQ P5–1: MIDI Filter 1

5–1–1: –1 T01–08, 
5–1–2: –1 T09–16

5–1–1(2)a: Track Select, Tempo, RPPR
5–1–1(2)b: Track Info

For more information, please see “2–1: Trim T01–08, 2–2: 
Trim T09–16” on page 224.

5–1–1(2)c: MIDI Filter 1

Track 01 (Track Number):

Enable Program Change

[Off, On]

Specifies whether or not MIDI program change messages 
will be received.

Enable After Touch

[Off, On]

Specifies whether or not MIDI after touch messages will be 
received.

Enable Damper

[Off, On]

Specifies whether or not MIDI CC#64 hold (damper pedal) 
messages will be received.

Enable Portamento SW

[Off, On]

Specifies whether or not MIDI CC#65 portamento on/off 
messages will be received.

Track 02...08, 09...16 (Track Number):

These are the MIDI Filter 1 settings for MIDI tracks 2–8 and 
9–16. They are the same as for track 1. For more information, 
please see “Track 01 (Track Number):,” above.

▼

5–1–1(2): Menu Command

• 0: Memory Status

☞

p.271

• 1: Panel–SW Solo Mode On

☞

p.106

• 2: Exclusive Solo

☞

p.107

• 3: Rename Song

☞

p.271

• 4: Delete Song

☞

p.271

• 5: Copy From Song

☞

p.271

• 6: Load Template Song

☞

p.271

• 7: Save Template Song (Save as User Template 

Song)

☞

p.272

• 8: FF/REW Speed

☞

p.272

• 9: Set Location (Set Location for Locate Key)

☞

p.272

• 10: GM Initialize

☞

p.273

• 11: Copy From Combi (Copy from 

Combination)

☞

p.273

• 12: Copy from Program

☞

p.273

For more information, please see “Sequencer: Menu 
Command” on page 271.

5–1

–1c

5–1

–1b

5–1

–1a

5–1

–1

Menu

Содержание M3








































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды