Korg M3, Руководство по параметрам

Страница: 281 / 647

Sequencer: Menu Command Memory Status
271
Sequencer: Menu Command
Tip: While this command is open, the ENTER switch will
operate as the OK button and the EXIT switch will operate
as the Cancel button.
Memory Status
This displays the remaining amount of sequencer memory.
Panel–SW Solo Mode On
When you select Panel–SW Solo Mode On and add a check
mark to the menu item, the MIX PLAY/MUTE 1–8 switches
will operate as Solo on/off.
For more information, please see “Panel–SW Solo Mode On”
on page 106.
Exclusive Solo
This specifies how the Solo function will operate. Each time
you select Exclusive Solo, the setting will alternate between
multiple solo and exclusive solo. For more information,
please see “Exclusive Solo” on page 107.
Rename Song
Here you can rename the selected song. A name of up to 24
characters can be input.
For more information, please see “Editing names” on
page 197 of the Operation Guide.
Delete Song
This command deletes the currently selected song.
1. Select “Delete Song” to open the dialog box.
2. If you wish to execute the Delete Song command, press
the OK button. To cancel, press the Cancel button.
When you execute this command, the musical data, setting
data, and patterns etc. of the currently selected song will be
erased, and the memory area allocated to that song will be
freed.
Copy From Song
This command copies all of the setting data and musical
data from the specified song to the currently selected song.
1. Select “Copy From Song” to open the dialog box.
2. In From, specify the copy source song number.
3. Select the data that you wish to copy.
All: will copy all setting data and musical data (track events
and patterns, etc.).
Without Track/Pattern Events: will copy only the setting
data of songs, except for Play Loop and RPPR data.
4. To execute the Copy Song operation, press the OK but-
ton. To cancel, press the Cancel button.
Be aware that if you execute All, all setting data and musical
data of the currently selected song will be erased and
rewritten by the data from the copy source song. If you
execute Without Track/Pattern Events, song setting data
other than Play Loop and RPPR will be rewritten.
Load Template Song
This command loads a template song as a song.
The built-in sequencer contains sixteen different preset
template songs
(P00–15) that contain preset settings for
programs and effects appropriate for various musical styles.
You are also free to create your own favorite settings for
programs, track parameters, and effects, and save them as
one of sixteen user template songs (U00–15). For more
information, please see “Save Template Song (Save as User
Template Song)” on page 272.
1. Select “Load Template Song” to open the dialog box.
2. In From, specify the template song that you wish to
load.
3. If you check Copy Pattern to Track too?, the Copy Pat-
tern To Track dialog box will appear automatically after
Load Template Song has been executed.
If you execute without checking this, only the template
song you specified in step 2 will be loaded.
4. To load the template song, press the OK button. To can-
cel without loading, press the Cancel button.
When you execute, song settings other than Play Loop and
RPPR will be copied.
If in step 3 you checked Copy Pattern to Track too? and
pressed the OK button, the Copy Pattern To Track dialog
box will appear.