Korg LED slider, Руководство по установке

Страница: 3 / 17

• Phillips Head Screwdriver
• Solder
• Center Punch or Marker
• Drill
• Soldering Iron
• Wire Strippers
• Desoldering Tool (Such as Hakko 808 or Similar)
Tools Required For Installation
1) Remove all slider caps from the ARP, then remove all PCBs from chassis.
Desolder all old CTS sliders and remove them from the boards. Always be
sure not to damage PCB traces when doing this.
When all sliders have been removed, clean the PCBs of dust and flux.
Installation of Sliders
Figure 1 - Test Fitting all Sliders (ARP Omni 2 shown)