moved to a upper edge
(see right figure)
Check displaying “o” right side when JOYSTI C is
moved to a lower edge.
(see right figure)
Check displaying “o” center when JOYSTI C is return
to the center.
(see right figure)
Release JOYSTI C after knocking down to the lower end, and it returns it to the center by the
power of the spring.
Check displaying “o” center.
Confir m that [OCTAVE UP] LED lights.
Push [OCTAVE UP] and start next check.
(note1) When objects other than the inspection object are oper ated, LED blinks.
It is possible to retry it by pushing [SHIFT/EXI T] button.
6-3. JOYSTI CH Y L ED
Make sure that the L ED on the JOYSTICK ambient light four points (1) to (4)
Proceed to the next test by pressing the [VALUE dial] If
there is no problem
7. PEDAL check
Pedal to be inspected will be displayed on the main display.
"| " is displayed on the LCD display when the
pedal is pushed.(see right figure)
note) If the pedal is pressed, "| " moves to the right.
If it is released, “| ” moves to the left.
7-1. SWITH C/PEDAL Check
Press EXP-2 slowly.
Check “o” is displayed on right edge when
pedal is pressed to max. position.
Check “o” is displayed on left edge when
pedal is return to min. position.
(1)
(2)
(3)
(4)
