H ow to enter the TEST MODE
Press the power switch for more than 1 second while holding down the 3 switches [FAVORITES],
[PAGE -], and [STRI NGS].( Switches in the blue frame)
Basic operation
1:[VAL UE DIAL]:
Proceed to the next check .
2:[FAVORITES]:
Item back
3:[PAGE -] :
Step back
Notation
"**** ***** *"
: Contents of the main display screen
[****** ****]
: The name of operator
Appear ance check
Make sure that you are not out of alignment of the lower case letter s pr int silk kind with the
holes in the jack
Confir m that there is no tilt and float volume, L ED, jack, switch, etc.
Confir m that it is not too narrow and not too wide gap between the keyboard
Confir m that there is no extreme difference in height.
Confir m that there is no difference between the extreme longitudinal direction.
Confir m that there is no wobbling units placed on a flat hard.
Confir m that there is no problem with the appear ance.
Prepar ation
Please connect settings as shown in the figure at the beginning of this document
Note) AC adapter, please use the one that is actually used
Down the front of the EXP-2 pedal to the full position.
