manualshive.com logo in svg

Korg EASYSTART D1600MKII, Руководство пользователя

Поделиться
Скачать
Korg EASYSTART D1600MKII Скачать руководство пользователя страница 151

143

Inser

t FX (2in2out x 2) /

Master FX / Final FX

Inser

t FX (2in2out x 2) /

Final FX

Inser

t FX

(1in2out x 2)

Inser

t FX

(1in1out x 4)

Inser

t FX 

(1in1out x 8)

Ef

fect Control

Ef

fect Parameter List

With “Envelope Select” = “L/R Mix,” the left and right channel sig-
nal mixture will trigger the gate on/off. When “L Only” or “R 
Only

” is selected, the gate is controlled by either of the channel sig-

nals.

: Polarity

This parameter reverses the Gate on/off operation. With a negative 
value, the gate is closed when the input signal level exceeds the 
Threshold.

: Attack, : Release

The Attack and Release parameters set the Gate attack time and 
release time.

: Delay Time

This parameter sets the delay time of the Gate input. If the sound has 
a very fast attack, increase the delay time so that the signal will be 
input after the Gate is opened.

25: DY5: St.Exciter/Enhancer

(Stereo Exciter/Enhancer)

This effect is a combination of the Exciter, which adds a punch to 
the sound and the Enhancer, which adds spread and presence.

: Exciter Blend

This parameter sets the depth (intensity) of the Exciter effect. Posi-
tive values give a frequency pattern (to be emphasized) different 
from negative values.

: Emphatic Point

This parameter sets the frequency to be emphasized. Higher values 
will emphasize lower frequencies.

: Enhancer Dly L [msec], : Enhancer Dly R [msec]

These parameters set the delay time for the Enhancer left and right 
channel. Specifying a slightly different delay time for the left and 
right channel will add a stereo image, depth, and width to the 
sound.

26: DY6: St.Decimator 

(Stereo Decimator)

This effect creates a rough sound like a cheap sampler by lower-
ing the sampling frequency and data bit length. You can also 
simulate noise unique to a sampler (aliasing).

DTime (Delay Time [msec]).... 0...100 Sets the delay time of the gate 

input

Mix (Wet/Dry) ....Dry, 1:99...99:1, Wet Sets the balance between the 

effect and dry sounds

Blend (Exciter Blend)......–100...+100 Sets the intensity (depth) of the 

Exciter effect

Empha (Emphatic Point)......... 0...140 Sets the frequency to be empha-

sized

LDly (Enhancer Dly L [msec])............
0.0...50.0

Sets the delay time for the 
Enhancer left channel

RDly (Enhancer Dly R [msec]) ..........
0.0...50.0

Sets the delay time for the 
Enhancer right channel

*Depth (Enhancer Depth) ........ 0...100 Sets the determines to what 

degree the Enhancer effect is 
applied

EQTrim (EQ Trim) ................... 0...100 Sets the 2-band EQ input level

LEQG (Pre LEQ Gain [dB]) ............. –
15.0...+15.0

Sets the gain of Low EQ

HEQG (Pre HEQ Gain [dB]) ............ –
15.0...+15.0

Sets the gain of High EQ

Mix (Wet/Dry) ... Dry, 1:99...99:1, Wet Sets the balance between the 

effect and dry sounds

LPF (Pre LPF) ....................... Off, On Selects whether the harmonic 

noise caused by a decrease in 
sampling frequency is generated 
or not

Fs (Sampling Frequency [Hz])...........
1.0k...44.1k

Sets the sampling frequency

Bit (Resolution)......................... 4...24 Sets the data bit length

Speed (LFO Frequency [Hz]) ............
0.02...20.0

Sets the LFO speed

*Depth (Depth)......................... 0...100 Sets the depth of the sampling 

frequency modulation

HiDamp (High Damp [%])....... 0...100 Sets the ratio of cut of the high 

range

Level (Output Level) ............... 0...100 Sets the output level

Inser

t FX (2in2out x 2) /

Final FX

Содержание EASYSTART D1600MKII



























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды