Warning:
Before removing the plug from the socket, switching off and better work for 30-60 second
for cool down in condition that protecting inner parts.
OVERHEAT PROTECTION
This heater is protected with an overheat protection that switches off the appliance
automatically in case of overheat,e.g. due to the total or partial obstruction of the grids.
In this case, unplug the appliance, wait about 30 minutes for it to cool and remove the
object which is obstructing the grids. Then switch it back on as decribed above. The
appliance should operate normally. Should the problem persist, please contact the
nearest customer service.
NOTE: To assist in maintaining the internal components, after pressing the OFF button the fan
will continue to blow room air for a period of 30-60 seconds before shutting down to standby.
Battery
The remote control use one button cells, model No. CR2025 (3V). We recommend the use of
Lithium type battery for longer use.
Note: Please follow battery disposal instruction on battery packaging, or contact your local
councils for safely disposal of batteries.
SAFETY SYSTEM
In the event of abnormal overheating, a safety device shuts down the appliance
automatically. After a short cooling down phase, the appliance is ready for use again.
If you still notice the same defect as above mentioned, remove the plug from the socket
and consult your authorized dealer to your after-sales service department.
During use, do not touch or cover the air outlet. This may cause the unit to over heat,
and the safety device to operate.