1. If you want to make it get into the state of keep warm, please pree the “PROG” button while
working, the red indicator light is off, and the green one(light) goes on. At this time the kettle
still working, only the figures flashed on the display to entering the’’ thermostat" mode, then
press the “TEMP+” or “TEMP-”button to adjust the temperature as you want.(temperature
range:50℃-95℃)。Once the temperature has been set, that means it will be enter the boiling
and warming state. Each button will be self-locked after 5 seconds. If you want to change the
set mode, please just press the “PROG”button, then reset it with the “TEMP+” or “TEMP-”but-
ton.
2. In the temperature range of 85℃-100℃,the heater will be cut off after about 15 seconds if
the temperature has stopped rising at certain temperature。 If you want to change the set
mode, please just press the “PROG”button, then reset it with the “TEMP+” or “TEMP-”button.
10. In the state of keeping warm, power supply will be no operation automatically after about
2 hours off.
WARNING: Do not leave the electric kettle unattended during making
the water, as you need operate manually sometimes!
3. The hot water may now be poured safely through the spout into another container, safety
cut ‒ out.
4. This kettle is equipped with a safety cut ‒out to protect the appliance from damage in case
of inappropriate use, should the appliance be accidentally operated without water or if all the
water has evaporated the safety cut out will automatically switch off the heating element.
5. In such a case remove the plug from the wall socket immediately and refill the kettle only
after an adequate cooling down period, about 15—20seconds Decalcifying
6. Should the appliance switch off before reaching boiling point this is a sign that decalcifying
is necessary.
7. Any regular descaling agent may be used, provided the relevant instructions are observed,
Do not fill the kettle to the upper mark to avoid spillage if the descaling agent causes the
water to foam .
8. To clean the kettle thoroughly of any decalcification residues let it go through several
boiling cycles using clean water with each cycle , Rinse the kettle with clean water afterwards .
Cleaning And Care
1. Before cleaning the appliance, ensure it is disconnected from the power supply and has
cooled down completely.
2. Do not use abrasives or harsh cleaning solutions.
3. Do not immerse the base or the kettle in any liquid, to clean the exterior, a slightly damp, lint
‒free cloth may be used.
4. It is advisable to remove lime deposits from the kettle at regular intervals.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the environ-
ment or human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To return your used device,
please use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmental safe
recycling.
05
06
Keeping Water Warm
