Before using for the first time
1. Prior to initial use, clean it by going through several boiling cycles, using clean water with
each cycle and filling the kettle (
Body
) to its upper marking.
Operation
2. Place the cordless base (
Cordless Base
) on a firm and level surface.
3. Pour the desired amount of clean water into the kettle (
Body
), Do not touch any part of the
kettle except the handle.When the appliance is in use, and ensure that the cover(
Cover
) is
properly closed , The amount of water can be measured by the level mark on the outside of
the kettle , Always pay attention to the minimum and maximum levels and ensure that the
cover (
Cover
)is properly and firmly closed .
4. Position the kettle in such a way on the sub base (
Cordless Base
) that the underside of the
kettle fits precisely into the contact on the base
5. Insert the plug into a wall socket.
6. The buzzer will sound “di” when plug in.
If no kettle on its stand, the LED will display “EO”.
If place kettle on its stand, the LED will display “OF”.
LED will display “OF” and the buzzer will sound “di” after the kettle complete its operation,
Take the kettle out of its stand, LED will display “EO”, the buzzer will sound “di”.
“EO” means no kettle on its stand, the product without any function, just with sound “di”
when press any button.
“OF” means appliance is on standby mode, the button is ready its function. any one button
pressed, the buzzer will sound “di”.
7. Press ON/OFF button once, the red indicator is illuminated，the electric kettle start to work
immediately ,while the display show”ON“.The power will automatically cut off when thewater
is fully-boiled. And before the water boiled, if you press ON/OFF button again，the electric
kettle stop working with the indicator light went out。
03
04
DESCRIPTION
Cover
Filter
Display
Lid Open Switch
Body
Handle
Sub base
Cordless Base
CONTROLS AND FEATURES
120V
1500W
4-8 MINUTES
GLASS
360°
AUTO SHUT-OFF
7.1CUPS/1.7LITERS
2AH60-AMK02
SPECIFICATIONS
RATED VOLTAGE
POWER
HEATING SPEED
KETTLE MATERIAL
BASE ROTATION
PROTECTION
CAPACITY
FCC ID
Operation Guidelines
