Chapter 5 Management Page 43
Figure 27 System Status
Real-time link statuses of all interfaces are shown in the menu.
System Up Time
Display how long the AP has been operating since last boot-up.
Interface Status
Indicate the interface is ENABLE or DISABLE.
Link Rate
Data Link Rate here indicates the maximum transmission rate available, and can be
used as an indication of link quality.
Link Quality
A Calculation of RSSI, signal and noise level to indicate the quality of the
communication link in percentage.
Channel
The channel used by the wireless interface.
Signal Level
A -70 ~ -50dBm signal level is recommended for a good connection. Too low a
signal, the wireless link between AP and AC cannot be established. Too high a signal level, the
power amplifier at the receiver might be forced to operate in saturation region and distorts the
signal waveform.
