33
network topologies are not supported by WDS and should be avoided in all the use cases.
3. Repeat the above procedures to configure the remote bridge.
4. Enter the actual distance in
Space In Meter
. For example, if the distance between the two ZAC
bridges is 3 kilometers, enter 3000 in the field. Click
Apply
to save configuration.
5. Use ping to check whether the link between the two bridges is OK.
6. To check the wireless connectivity, go to
Status > Connections
. If the connection is established,
it will display association information of the remote bridge including MAC address, wireless mode,
signal strength and connection time.
AP Repeater Mode
1. Go to
Wireless > Basic Settings
. Choose “
AP Repeater
” from Wireless Mode, and click
Apply
to
save it.
