4.6
the
r create a diagnostic for you to check the problem when issues with the switch occur.
The following commands are included in this section:
4.6.2 Ping
.6.1 Port
Statistics
O
istics for each port. The statistics that can be
vi
n. Rx means
, this may mean that your network cable
ectly or the network performance of the port is poor. Please check your
ork Interface Card connected to your device, the network application, or
e network traffic.
ted
to reset the counts of the selected ports and on
Clear All
to reset the
ode
ounter will be reset to 0..
Monitoring and Diagnostic
JetNet 3706/JetNet 3706f
provides port statistics function for you to monitor the status of
switch o
4.6.1 Port Statistics
4
n this page, you can view operational stat
ewed include Link Type, Link State, Rx Good, Rx Bad, Tx Good, and Collisio
the received packets while Tx means the transmitted packets. The statistics can just show Rx
Good and Tx Good or Rx Bad and Collision.
Note: If you see an increase in Bad or Collision counts
is not connected corr
network cable, Netw
reallocate th
Click on
Clear Selec
counts of all ports. Click on
Reload
to refresh the counts. Also, Click on
Bad-Collision M
to change counter mode to RxBad and TxCollisions mode and on
Good Mode
button to
change counter mode to RxGood and TxGood mode.
Note: If the mode is changed. The statistics c
JetNet 3706/JetNet 3706f Industrial Web Managed PoE Plus Switch
35
