3
1.4 JetI/O 6510 Product Specification
System Feature
CPU:
16 bits/100MHZ, RISC-Based
Network Protocols:
IP, TCP, UDP, SNMP, HTTP,
BOOTP, DHCP, Modbus/TCP, OPC Server
SDRAM:
32K bytes
Configuration:
Windows Utility, Web browser, SNMP,
DHCP Client, TFTP Server for firmware update
Flash ROM:
512K bytes
Windows
Utility:
Block I/O Utility, Device Fider Utility
EEPROM:
256 bytes
OPC Server Utiltity:
OPC Server for Modbus/TCP
Watchdog Timer:
1.0 sec H/W
SNMP:
MIB-II: System, SNMP Trap and Private MIB
LED:
SNMP Trap Server:
Up to 4 SNMP Trap Server
PWR: Power Input plugged and On (Red)
Logic Condition&Go Rules:
Conditions of the
DI/Counter values, Actions include DO/Pulse, Counter
and Trap
RDY: System startup ready (Green)
Program:
C++ Example code by optional
Network Interface
Power Requirements
Ethernet:
IEEE 802.3 10Base-T
System
Power:
external unreg24V (18-32V)
IEEE 802.3u 100Base-TX
Power Consumption:
Max. 3.2W
Connector:
1 * RJ-45, Auto MDI/MDI-X
Mechanical
Protection:
Built-in 1.5 KV magnetic isolation
protection
Dimensions:
120 (H) x 55 (W) x 75 (D)mm
LED: Mounting:
Din-Rail
Upper (LAN Activity): Orange ON & Blinking
Material:
Aluminum
Lower (10M/100M): 10M à Green OFF, 100M à
Green ON
Environmental
PWR: Power On (Green)
Regulatory Approvals:
CE, FCC Class A
RDY: System boot up Ready (Red), system
booting (No LED)
Operating Temperature:
-10 ~ 70°C
Network Protocols:
IP, TCP, UDP, SNMP,
HTTP, Telnet, BOOTP, DHCP
Operating Humidity:
20 ~ 90% non-condensing
Analog Input
Storage Temperature:
-20 ~ 70°C
Input Channels:
8 Channels
Warranty:
3 years
Resolution:
16 bits
Input Range:
Voltage: ±10V, ±5V, ±1V,
±500mV, ±150mV
Current: ±20mA
Accuracy:
±0.05% of FSR ±1LSB
Sampling Rate:
10 samples/sec (total)
Input Impedance:
10M ohm
Calibration:
On Board EEPROM
Isolation Voltage:
2500Vrms
