Korenix JetCon 1100 Series, Руководство пользователя

Страница: 25 / 28

21
RS-422 / RS-485 baud rate up to 921.6Kbps
FIFO Buffer
Transmit Buffer: 128 Bytes
Receive Buffer: 256 Bytes
Interface
Connector
USB: Mini USB slave , B-Type
Serial: DB-9, Female
Cable for Serial Interface RS-422 / RS-485: Twisted Pair Cable.
Operating Mode
Select and Control by DIP Switch setting.
Build-in 120ohm line terminator resistor and configured by DIP Switch.
Connection Distance
USB:5 Meters
4-wire RS-422 mode:
1500 meters (4,900 feet)
2/4-wire RS-485 mode: 1200 meters (4,000 feet), Max 32 Nodes.
Serial Parameters
Length of Data bit: 7, 8 bits
Stop bit:1,2
Type of parity check:
None, Even, Odd, Space, Mark
Serial Signal
RS-422: TX+, TX-, RX+, RX-, Signal GND.
RS-485 (4-Wire): TX+, TX-, RX+, RX-, Signal GND
RS-485 (2-Wire):Data+, Data-, Signal GND
DIP Switch
Serial communication mode selection (DIP-Switch 1,2),RS_485 ECHO mode
selection (DIP-Switch 3), Line Terminator selection (DIP-Switch 4)
System LED
TX Blinking ( Green): Transmitting Data
RX Blinking (Amber): Receiving Data
Operating System Support
Windows
XP, 2003, Vista, 2008, Win 7
Macintosh
System 8, 9
Linux
2.4, 2.6
Power Requirements
System Power
Obtain from USB Host interface
Isolation Protection
3KV insulation between USB Host interface and RS-422/ RS-485 serial
interface (JetCon 1201i-3KV)
Mechanical
Installation
DIN Rail mount
Case
Plastic Case with IP-30 protection
Dimension
101.9 mm(H) x 42.0mm (W) x 22.0mm (D)
Environmental
Operating Temperature
-30
°
C ~75
°
C
Operating Humidity
0% ~ 90% non-condensing
Storage Temperature
-40
°
C ~ 80
°
C
Storage Humidity
0%~ 95%, non-condensing
Regulatory Approvals
EMC
CE, FCC A
Warranty
3 Years