Page 26
Version 02-2010
Compakt-Comfort-2
Operation
9.
Throttle lever
The throttle lever is located on the right-hand steering shaft (see fig. 20).
Please ensure that it is adjusted correctly in
accordance with the engine manufacturer’s operating
manual.
Engine speed regulation according to type of use
(for minimisation of noise and vibration)
The engine speed can be read from the
operating hour meter.
2,700 rpm – use with mowing bars
3,000 rpm – use with flail mowers
3,300 rpm – use with all-purpose mowers
10.
Shaft height adjustment
(STANDARD)
Adjustment of the steering shaft height
The steering shaft height can be individually adjusted using lever C (see fig. 21). Pull lever C
back until the shaft guide is released from the latch. The steering shaft can be locked further up
or further down by releasing and latching lever C.
11.
Swivel steering shaft
(OPTIONAL ONLY)
In order to attach devices at the rear of the
2-wheel tractor, the swivel steering shaft must
be swivelled by 180° without tools.
Swivel the shaft only when the
2-wheel tractor is stationary! The twist-grip must be
in the 0 position and the power take-off must be disengaged, otherwise the safety lug of the
safety stop device will be bent. The safety stop device then no longer works.
Fig. 20. Throttle lever positions
Fig. 21. Steering shaft height adjustment.
Lever C
Throttle lever –
idling
