21
HOW TO USE THE SPRAY
Before using the spray feature, check the fabric label for ironing in-
structions because some fabrics may be spotted or stained with moi-
sture.
The spray feature is particularly helpful for removing stubborn wrinkles
and where extra dampening is needed. The spray may be use with
steam or dry ironing. Simply pump the Spray Mist knob when spray is
desired.
HOW TO USE AS STEAM IRON
Fill the iron as described in ‘ How to fill with water’.
1) Position the iron vertically and turn the Temperature Control Dial to
the steam position.
2) Plug the Cord into the electrical outlet.\
3) Set the Temperature Control Dial to the steam position. Steam Iro-
ning
is only possible when at higher temperature settings indicated
with ‘MAX’ mark; otherwise the water will leak from the soleplate.
4) Preheat the iron until the indicator light goes out. The light will turn
off when the indicated setting reaches the correct temperature.
5) Turn the Variable Steam Control Knob to the required setting for
different types of fabric.
Now steam ironing can begin.
HOW TO USE THE BURST OF STEAM
The burst of steam feature provides additional steam for removing
stubbom wrinkles. It may be used with steam or fry ironing.
Press the Power Steam button to release the surge of steam. Pressing
the button several times may be necessary to prime the surge system.
Wait a few seconds for the steam to penetrate the fabric before pres-
sing the button again for more steam.
Note:
For optimum steam quality, do not apply more than three suc-
cessive shots after the indicator light goes off.
Содержание 5902399
Страница 1: ... ...
