20
• NEVER LET THE POWER CABLE TO RUN THROU-
GH SHARP EDGES; AVOID CRUSHING IT.
• DO NOT USE THE DEVICE IF IT SHOWS MALFUN-
CTIONS OR IT RESULTS DAMAGED.
• DO NOT LEAVE THE APPLIANCE EXPOSED TO
ATMOSPHERIC AGENTS (RAIN, FROST, SUN, ETC.).
• NEVER USE THE APPLIANCE:
- WITH WET OR MOIST HANDS;
- IF IT HAS FALLEN OR HAS OBVIOUS RUPTURES
OR MALFUNCTIONS;
- IF THE PLUG OR POWER WIRE RESULTS DEFECTIVE;
- IN HUMID OR GAS SATURATED ENVIRONMENTS.
• DO NOT COVER THE APPLIANCE WITH TOWELS,
CLOTHES, ETC.
• PLACE THE APPLIANCE ONLY ON HORIZON-
TAL AND STABLE TABLE TOPS, AND AWAY FROM
SHOWERS, BATHTUBS SINKS, ETC.
• IF THE APPLIANCE GETS WET OF GETS IN CON-
TACT WITH WATER, DO NOT USE IT AND MAKE IT
CHECK BY A SPECIALISED LABORATORY.
• ALWAYS REMOVE THE MAIN PLUG FROM THE
POWER SUPPLY IMMEDIATELY AFTER ITS USE AND
BEFORE PERFORMING ANY CLEANING OR MAIN-
TENANCE WORK.
• IF THE POWER CABLE IS DAMAGED, IT HAS TO
BE REMOVED BY THE MANUFACTURER OR BY THE
DEDICATED CUSTOMER CARE OR BY SOMEONE
WITH A SIMILAR LICENCE, IN ORDER TO PREVENT
ANY RISK.
• REPAIRS SHOULD BE CARRIED OUT ONLY BY A
QUALIFIED TECHNICIAN.
