21
FOR HOUSE HOLD USE ONLY
1.Use the iron for its intended purpose, for ironing fabrics on board.
2.To protect against bums or injury to persons, do not iron or steam
fabrics while being worn on the body.
3.The iron should always be turned ‘OFF’ before plugging or unplug-
ging from outlet. Never pull cord to disconnect from outlet, instead,
grasp plug and pull to disconnect.
4.Do not allow cord to touch hot surface. Allow the iron to cool com-
pletely before storing.
5.Always disconnect iron from electrical outlet for filling or emptying
water and when not in use.
6.To avoid risk of electric shock, do not operate iron with a damaged
cord or if the iron has been dropped or damaged.
7.Close supervision is necessary for this appliance being used by or
near children. Do not leave iron unattended while connected or on an
ironing board.
8.Burns can occur from touching hot metal parts, hot water, or steam.
Hot water may leak from the iron. Use caution when filling or turning
the steam iron upside down.
9.To protect against burns or injury to persons, do not direct steam
toward the body when ironing.
10.The iron must be used and rested on a stable surface. When pla-
cing the iron on its stand, ensure that the surface on which the stand
is placed is stable.
.
HOW TO FILL WITH WATER:
Make sure the iron is turned off and the power cord is unplugged
from the electrical outlet.
1. Set the ‘Variable’ steam knob to the ‘0’ position before filling the
iron with distilled water.
2. Open the ‘Water Fill’ Opening and fill the tank up to the ‘MAX’
line on the tank.
3. The water level can be observed through the transparent part of
the tank, when iron placed vertically, in case of water level becomes
low, refill the tank, following the procedure described in steps 1 to 3
above.
4. Pour out the remaining water after use.