13
• FULLY UNWIND THE POWER CORD BEFORE OPE-
RATING THE APPLIANCE.
• USE AN ELECTRIC EXTENSION CORD ONLY IF IT
IS IN PERFECT CONDITION.
• NEVER LET THE POWER CORD RUN THROUGH
SHARP EDGES; AVOID CRUSHING IT.
• DO NOT LEAVE THE CABLE SUSPENDING OVER
THE TABLE OR ON THE WORKBENCH AND AVOID IT
COMING INTO CONTACT WITH WARM SURFACES.
• DO NOT PLACE ABOVE OR NEAR GAS OR
ELECTRIC RING OR HEATED OVEN.
• NEVER OPERATE THIS APPLIANCE IF IT IS NOT
WORKING PROPERLY AND IF IT HAS BEEN DROP-
PED OR DAMAGED
• DO NOT LEAVE THE APPLIANCE EXPOSED TO
ATMOSPHERIC AGENTS (RAIN, FROST, SUN, ETC.).
• NEVER USE THE APPLIANCE:
- WITH WET OR MOIST HANDS;
- IF IT HAS FALLEN AND HAS OBVIOUS RUPTURES
OR MALFUNCTIONS;
- IF THE PLUG OR POWER CORD DEFECTIVE;
- IN HUMID OR GAS SATURATED ENVIRONMENTS.
• DO NOT COVER THE APPLIANCE WITH TOWELS,
CLOTHING, ETC.
• PLACE THE APPLIANCE ONLY ON HORIZONTAL
AND STABLE SURFACES, AWAY FROM SHOWERS,
BATHTUB, SINKS, ETC.
• IF THE APPLIANCE IS WET OF GETS IN CON-
TACT WITH WATER, DO NOT USE IT AND HAVE IT
CHECKED BY A SPECIALISED LABORATORY.
• ALWAYS REMOVE THE MAINS PLUG FROM THE
