VII. Specific Model Data
Mounting
Kooltronic Air Conditioners have been engineered to be installed easily. To avoid damaging
your Air Conditioner, please read the following information before installation.
•
Panel-Mounted Air Conditioners are equipped with two vertical mounting rails.
These rails can be mounted to any available vertical surface on the enclosure.
•
Refer to page 8 for the location of all mounting holes and cutouts.
•
Make sure the cutouts don't interfere with components inside your cabinet.
•
Proper alignment of all air inlets and outlets is essential for optimum performance
of the Air Conditioner.
•
All externally-mounted Air Conditioners are fully gasketed to ensure proper sealing.
This seal is necessary to maintain the integrity of the closed loop system.
•
Use all existing mounting holes to insure stability and a tight seal.
•
High strength mounting screws are recommended.
•
Attach the brass drain pan fitting and drain hose supplied to the drain exit on the
bottom or lower side panel of the Air Conditioner. The optional field installed
Condensate Evaporator is mounted underneath the Air Conditioner and the drain
hose is connected to the top fitting of the Condensate Evaporator. The drain hoses,
fittings and Condensate Evaporator must be removed before dismounting the Air
Conditioner, as they will not support the weight of the Air Conditioner unit.
•
The external drain hose must not be elevated above the exit port. Improper mounting
will impede the flow of condensate and may cause internal malfunctions.
CAUTION
If the Air Conditioner is mounted to the cabinet door you must be sure
that the door hinges will support the additional weight of the Air
Conditioner. Also be certain that when the door is opened fully, the
cabinet does not become unbalanced. The actual weight of the unit can
be found on page 9.
7
