Kooltronic KAC4P3777R, Руководство оператора

Страница: 3 / 17

3
II. Incoming Inspection
Kooltronic Air Conditioners are designed, built and packaged to withstand the shock and vibration normally
associated with shipment by common carriers. Occasionally improper handling during shipping causes damage.
Such handling could include unbanding of palletized shipments, failing to respect
"This Side Up" arrows, rough
handling, falling off conveyors, excessive vibration, crushing, etc. Therefore, a thorough inspection should be
done upon receipt of all shipments. Any packaging tears, dents, scratches, loose articles or evidence of oil are
signs of damage and should be noted on the Freight Bill. Shipments should be opened immediately and the units
inspected for CONCEALED DAMAGE. Kooltronic Air Conditioners must be delivered in the proper mounting
position to assure that damage to the compressor has not occurred during shipping. Any Kooltronic Air
Conditioner that is delivered lying down or removed from the shrink wrapped or banded pallet should be refused.
An immediate claim MUST be filed with the freight carrier and an inspection requested. Retain all packing
materials. Kooltronic cannot assume responsibility for Consignee's failure to file a timely freight claim.
III. Product Handling:
1) Do not attempt to operate your Kooltronic Air Conditioner until you read and thoroughly understand this
Manual. See section VI PRE-INSTALLATION TESTING.
2) Before operating the Kooltronic Air Conditioner be certain that it is placed in its correct mounting position.
All Air Conditioners containing an M, P, or V as part of the model number are designed to operate
in a vertical position only. All Air Conditioners containing an H, RT or RM in the model number are
designed to operate in a horizontal position only.
This placement must be done a minimum of 5 minutes
prior to operating in order to allow the compressor oil to drain to the compressor sump area.
CAUTION
3) Before operating this unit, all electrical wiring must be checked to assure the proper connection to the
correct power source. Minimum circuit ampacity should be at least 125% of the amperage found on the air
conditioner label for the corresponding voltage. Do not exceed the maximum fuse size found on the label.
4) We do not recommend that Air Conditioners be shipped to their final destination attached to an enclosure.
In the event that the Air Conditioner needs to be shipped attached to an enclosure it is strongly
recommended that proper support be provided for the Air Conditioner. Excessive vibration can occur if Air
Conditioners are not properly supported when shipped on enclosures, increasing the potential for internal
damage and voiding the warranty.
5)
PROCEDURE FOR PROPER PACKING AND SHIPMENT OF KOOLTRONIC AIR
CONDITIONERS:
■
Keep Air Conditioner in proper upright position indicated by arrow markers.
■
Pack Air Conditioner in a suitable container (preferably original packaging if possible), with
adequate internal protective packaging, making sure shipment is marked and is kept in correct
upright position.
■ For local, controlled transportation, strap packaging to a secure part of truck to prevent falling
or sliding, minimize vibration, etc.
■ For common carrier shipment, band unit(s) securely to a pallet. Unpalleted shipment risks
severe damage which voids the warranty.
Kooltronic Air Conditioners must be operated in their proper mounting position. If attempts are
made to operate a unit that is not in its designed mounting position, permanent compressor
damage will occur. This action will void the warranty. To avoid compressor damage do not tip the
unit more than 45° from its proper mounting position.