4
III. Incoming Inspection
Advantage Sentry Series Filter Fans are designed, built, and packaged to withstand the shock and vibration
associated with shipment by common carriers. Occasionally improper handling during shipping causes
damage. Therefore, a thorough inspection should be performed upon receipt of all shipments. Any carton tears,
dents, scratches, or loose articles should be noted on the Freight Bill. Cartons should be opened promptly and
the units inspected for CONCEALED DAMAGE
.
An immediate claim MUST be filed with the freight carrier and an inspection requested. Retain all packing
materials. Kooltronic cannot assume responsibility for Consignee's failure to file a timely freight claim.
IV. Product Handling
■
Do not attempt to operate your Filter Fan until you read and thoroughly understand this Manual.
■
Before operating this unit, all electrical wiring must be checked to assure the proper connections.
■
Use only on GFCI Protected Recepticals.
V. Product Identification and Nameplate
Each Filter Fan includes an identification nameplate. This nameplate provides:
CAUTION
Operate this unit only on the proper voltages and frequencies as noted on the nameplate
➀
Model Number
➁
Electrical Power Characteristics
➂
Serial Number
We recommend you copy this information from your
unit.
➀
When ordering parts, specify
the Model Number.
➁
Before operating, be sure
that the power source
matches these requirements.
WITH THIS FAN
EXTENSION CORD
THERMALLY PROTECTED
CSA STD C22.2 NO. 113
UL STD 50E; CERTIFIED TO
CONFORMS TO UL STD. 507,
E361673
Filter Fan
DO NOT USE AN
OUTDOOR USE
FINAL ASSY. NO.
M.O. NUMBER
MAINTAINED
NEMA TYPE 4
KOOLTRONIC, INC. PENNINGTON, NJ
MANUFACTURED BY:
ALL MOTORS ARE
VIOLATES WARRANTY
UNAUTHORIZED SERVICE OR MODIFICATION
SERVICE AIR FILTERS REGULARLY
AMPS
PH.
FREQ.
VOLTS
SERIAL NO.
MODEL NO.
VI. Installation Instructions
The Advantage Sentry Series NEMA 3R Filter Fans have been engineered to be installed easily. These NEMA 3R
filter fans have been designed for indoor or outdoor use. Prior to mounting, refer to pages 6 for the mounting
drawings showing dimensions and locations of mounting holes and cutouts. Prior to cutting or drilling, make sure
that cutouts and mounting holes do not interfere with components inside the cabinet.
➀
➁
➂
Содержание Advantage Sentry KNP100F
Страница 5: ...5...
