Assembly steps
4. Install the handle
Take the handle first, connect the wire on
the handlebar with the wire on the body,
and then insert the handle into the body
hole to connect with the front axle, place
in gasket and lock with M8 nut.
5. Remove seat and connect
power supply
Remove seat with cross screws (as shown
in figure), then connect the power cord.
Install the seat and lock the screws with a
cross screwdriver.
Battery warning!
Different kinds and new/old batteries cannot be used together.
Non-rechargeable batteries cannot be recharged.
Rechargeable batteries should only be charged by adults.
Rechargeable batteries should be taken out before recharging.
Batteries can only be interposed in right poses.
Used batteries should be taken out of the toy in time.
Short
circuit is strictly prohibited.
Do not use dry cell.
6
