QUICK START GUIDE
1.
Plug the SmartPlug into a desired outlet. The LED will start blinking green to indicate it is
ready for network setup.
2.
Make sure your iPhone or iPad (iOS8.1 or later) is connected to a 2.4GHz Wi-Fi
network.Using the router utility software, shutdown 5GHz Wi-Fi networks.
3.
Download and open the free Koogeek Home app from the App Store.
4.
Log in or sign up for aKoogeek account or simply tap Skip.
5.
Tap “+” in the right corner and follow the on-screen directions to complete network setup.
Note: To add more plugs (or repeat the plug setup process), tap “+” and you will see the
accessory list. Each accessory has an identification code, e.g., Koogeek. Make sure the last 6
characters of the identification code is consistent with the last 6 characters of MAC on the back of
your Smart Plug.
6.
When prompted, scan the setup code or manually enter the setup code, and then follow the
step to add the device to the Home and Room.
After scanning the setup code, if the app prompts “Couldn’t add Koogeek”, please refer to the
first FAQ. Please keep the setup code for future use.
7.
You can assign a name to your device and use this name when speaking to Siri. For example,
you can name your device “Printer”, then launch Siri and speak “Turn on the Printer”.
8.
Set up customized scenes to control multiple devices with a single command. For example, if
you assign the “I'm going to bed” command to the scene of turning off bedroom light and turning
on the fan, when you speak “I'm going to bed” to Siri, everything is done.
Note:
The use of a HomeKit-enabled accessory need the follow permissions:
Settings >iCloud>iCloud Drive>Turn On
Settings> iCloud>Keychain>Turn On
Settings >Privacy>HomeKit>Koogeek Home>Turn On
PLUG OVERVIEW:
Button
Power / Wi-Fi Status Indicator
Button
Press once to manually control the switch (Turning plug “On” or “Off”)
Restore factory setting: Press and hold the button for about 10 seconds until the LED turns red.
Содержание P2
Страница 1: ...User manual Model P2 P2X Brand Koogeek ...
