background image

 

6

If wiring needs to go through wall, the plug should be firstly wrapped with tape so 

as to avoid the sand or dirt going into the plug thus resulting in malfunction. 

Use double-sided tape fix camera on the wall or door as the following diagram. 

 

 

Take off the screw on the bottom, remove the back box fit on the wall, embed the 

camera to the back box and use screws to fix as the following diagram. 

 

If it is inconvenient for the user to install power adapter near outdoor camera, 

user can also select solar panel module and rechargeable battery for outdoor 

camera. But the solar panel module and rechargeable battery are not included in the 

product package list. 

The Vmp and Imp of the 2w solar panel module are 5v and 400mA respectively.   

The wire between solar panel module and camera length is 6 meters. You’d 

better put the solar module on the place the sun can directly shine. The battery 

costs 3~4hours to be fully charged by strongly directly shinning. Outdoor camera 

can work about 30 days each full recharge.   

 

7

 

7.  E-lock installation 

  E-lock and power of e-lock are not included in this product. Unlock control 

connects e-lock, shares 12V power adapter with e-lock when it works.   

 

 

 

 

 

 

 

 

 

Содержание KX7001










Отзывы: