CEILING HOOK INSTALLATION INSTRUCTION
IMPORTANT
– DO NOT SLIDE ELECTRICAL WIRE OR WATER HOSE OVER HOOK. SLIDE
CHAIN LINK ONLY OVER HOOK.
CAUTION
– Injury to persons or damage to the ceiling may result if the bottle or mounting
hardware is pulled from the ceiling. To avoid such injury, mount only to ceiling member that are
structurally sound.
FOR HOLLOW CEILINGS
Drill 5/8” diameter hole in the ceiling at desired hook location.
Assemble toggle bolt by screwing bolt (A) into toggle (B).
Insert flaps and bolt assembly (A / B) hinge up into ceiling
hole with the bolt (A) protruding through ceiling. Lock
assembly by turning hook (C) clockwise until firmly seated.
FOR WOOD BEAM CEILINGS
Screw hook clockwise into ceiling until firmly seated.
FOR EITHER METHOD
Hang the bottle assembly by a chain from the hook so that
the bottom of the bottle is 1 meter (1 yardstick) from the water
inlet on the iron.
