KT-1E– TROUBLESHOOTING
Malfunction
Reasons
Remedy / Solutions
-The indicator light
doesn’t on.
-No power.
-Main control goes
wrong.
-Fuse is burnt out.
-Panel goes wrong.
-Check the circuit.
-Change the control board.
-Change the fuse.
-Change the panel.
-Out of control.
-Interfered by power.
-Interfered by
environment.
-Panel does wrong.
-Power off.
-Remove or keep away from
interference.
-Change the panel.
-Display is normal
but without wind or
the wind speed is too
low.
-The fan is stuck.
-Cooling pad or dust filter
is blocked.
-Fan is distorted.
-Main control board goes
wrong.
-Check the cooler fixing hoops
and fan.
-Clean cooling pad or dust filter.
-Change fan.
-Change the main control board.
-The motor is out of
control.
-Main control board goes
wrong.
-Panel goes wrong.
-Change the main control board.
-Change the panel.
-Water leak of
draining valve.
-Draining valve is loose.
-Screw slightly.
-Air diffuser doesn’t
run.
-
S
ynchronous motor is
burnt out.
-Crankshaft is broken off.
-Crankshaft and swing
bar fall off.
-Change
s
ynchronous motor.
-Change crankshaft.
-Fix crankshaft and swing bar
again.
-Water drops splash
out of the air
diffuser.
-Water pipe falls off.
-Check water pipe.
NOTE:
This trouble shooting is for reference purpose only. If any technical
assistance is needed, please contact your distributor for service / repair.
Healthy & Comfortable
Energy-saving & Environment-friendly
Very reliable quality.
Hugh effective cooling area.
Very quiet.
Speed adjustable.
Automatic swing.
Full function remote controller.
Bigger water tank.
No need for compressed air.
No installation, no duct work design.
Easy to use, easy to clean.
Maintenance friendly.
Anti-bacterial device.
