8. Assembly, Disassembly
VRack 4U – User's Guide (prelim. version V0.99)
To install or remove an expansion card, perform the following steps:
1.
Turn your system off and disconnect it from the AC power supply.
2.
Loosen the cover fastening screw on the front side (Fig. 8, pos. 12) that secures the cover on the front side.
Fig. 17: Loosening the knurled cover fastening screw on the front side
2
1
Fig. 18: Pull out the cover with the fixing bolts on the rear
3.
Pull the cover out a little bit (Fig. 18, step 1) to release the cover centering bracket at the front and the fixing bots on
the rear side.
4.
Lift the cover up (on the rear side, Fig. 18, step 2) and remove it (Fig. 19).
Fig. 19: VRack with removed cover
5.
In order to re-assemble the system, follow the steps in reversed order. Close the VRack 4U platform and secure the
cover with the captive knurled screw.
www.kontron.com
25
