![Kontron ThinkIO-P Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/kontron/thinkio-p/thinkio-p_manual_1996328007.webp)
ID 29867.06, Rev. 01
© 2007 Kontron Modular Computers GmbH
P R E L I M I N A R Y
29867
.06_01.VC.070319/151229
Page 3
ThinkIO
™
- P
PROGRAMMING ASSISTANCE GUIDE
CoDeSys PLC
Standard Network Configuration
If the IP address of the ThinkIO-P is known and it is required to change the address, the
ThinkIO-P maybe accessed via Web Based Management. In any event, the IP address of the
ThinkIO-P is required to download a CoDeSys application.
4.2
Providing a Route Between the Windows Host PC and the
ThinkIO-P
If the host PC and the ThinkIO-P reside in two different networks, a logical route between the
networks must be established. This is accomplished using the DOS line command "route" on
the Windows host PC.
In the following example, 192.168.52.220 is the IP address of the ThinkIO-P, and the address
of the gateway for this network is 193.102.136.40. The command is as follows:
route ADD 192.168.52.220 MASK 255.255.255.0 193.102.136.40
target sub-netmask gateway
To verify the communication path, issue a "ping" command.
LOCAL HOST PC
GATEWAY
IP Address:
192.168.1.1 (for example)
Sub-netmask:
255.255.255.0
IP Address:
nnn.nnn.nnn.nnn
THINKIO-P
IP Address X9: 192.168.0.50
(factory setting)
Sub-netmask: 255.255.255.0
SWITCH/HUB
Note:
The gateway may or may not be
present in this configuration.