P R E L I M I N A R Y
29867
.06_01.VC.070319/151251
© 2007 Kontron Modular Computers GmbH
ID 29867.06, Rev. 01
Page 20
CoDeSys PLC
PROGRAMMING ASSISTANCE GUIDE
ThinkIO
™
- P
7. Assign variables to the addresses of the inputs or outputs of the modules for use within
the application. (e.g. module 750-400 with variable names KBUS_IN1, KBUS_IN2 and
module 750-501 with variable names KBUS_OUT1, KBUS_OUT2)
•
to assign a variable to an input or output of a module, first expand the module by click-
ing the plus sign (+) in front of the module designator, click the input/output to highlight
it, then click "AT" at the beginning of the address of the module to open a text insertion
box
•
type the variable name in the text insertion box, then press
<ENTER>
to accept the
name and close the box
•
repeat the above until all inputs and outputs have been assigned variable names
