![Kontron SMARC-sAMX8 Скачать руководство пользователя страница 27](http://html1.mh-extra.com/html/kontron/smarc-samx8/smarc-samx8_user-manual_1996325027.webp)
Kontron SMARC-sAMX8 - Rev. 1.2
www.kontron.com
// 27
5.5. Multiplexer
There are 4 multiplexers on board to support various configurations possibilities. These multiplexers are configured in
the BSP. Below you will find more information on the different multiplexers on the SMARC module:
Table 8: Memory Options
Multiplexer
Description
SATA/PCIe
Allow to choose between an additional PCIe port or a SATA port. Do note that there is only
two roots port for PCIe device.
DSI1 / eDP DP
Allow to choose between the eDP/DP bridge chip or DSI0 from the SoC on the SMARC
connector. DSI0 is going through a second mux since DSI0 is shared with LVDS Channel1.
Note: DSI0 from SoC is connected to DSI1 on SMARC connector.
DSI1 / LVDS0 Channel1
(Standard SMARC 2.0 module pinout)
Allow to choose between the DSI0 from the SoC or the LVDS0 Channel1. Do note that the
multiplexer DS1 / eDP DP should be set to DSI for the DSI option to work.
DS1 / (SPI3 and CAN3)
(Custom SMARC module pinout)
Allow to choose between the DSI0 from the SoC or SPI3 and CAN3. Do note that the
multiplexer DS1 / eDP DP should be set to DSI for the DSI option to work.
HDMI and DisplayPort / HDMI RX
Allow to choose between the HDMI/DP TX from the SoC or HDMI RX from the SoC
5.6. SMARC Connector
The SMARC connector has different pins on both sides:
Top side: 74 pins are on the left side, 82 pins on the right side
Bottom side: 75 pins are on the left side, 83 pins on the right side
Figure 10: 314-pin SMARC Connector,