Kontron PCI-AOB16/12 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 78

background image

Introduction 4-3

PCI-AOB8/12 (16/12) User’s Guide

A

dd

res

s S
ele

ct

ion

ä

ä

ä

ä

Introduction

These cards use two I/O address spaces, one of 64 bytes and one of 256 bytes.  The DACs occupy
the first 32 bytes of the first area.   The digital I/O circuit uses the next four register locations.
The timer/counter chip uses four locations after that.  The other 24 addresses are reserved.  The
2nd I/O address space of 256 bytes is used for software calibration data.  These two I/O address
spaces are defined in the “Port Address Selection Table” in the “Programming” section of this
manual.

PCI architecture is Plug-and-Play. This means that the BIOS or operating system determines the
resources assigned to PCI cards rather than you selecting those resources with switches or
jumpers. As a result, you cannot set or change the card's base address or IRQ level. You can only
determine what the system has assigned.

To determine the base address that has been assigned, run the PCIFind.EXE utility program
provided. This utility will display a list of all of the Kontron cards detected on the PCI bus, the
addresses assigned to each function on each of the cards, and the respective IRQs.

Alternatively, some operating systems (Windows 9x and NT/2000) can be queried to determine
which resources were assigned.  In these operating systems, you can use either PCIFind or the
Device Manager utility from the System Properties Applet of the control panel.  The card is
installed in the Data Acquisition class of the Device Manager list.  Selecting the card, clicking
Properties, and then selecting the Resources Tab will display a list of the resources allocated to
the card.

PCIFind uses the Vendor ID and Device ID to search for your card, then reads the base address and
IRQ.

If you want to determine the base address and IRQ yourself, use the following information.

The Vendor ID for these cards is 494F. (ASCII for "IO")

The Device ID for the PCI-AOB12-8 channel is 6CA8h.
The Device ID for the PCI-AOB12-16 channel is 6CB0h.
The Device ID for the PCI-AOB12-8 channel V is 6CA9h.
The Device ID for the PCI-AOB12-16 channel V is 6CB1h.

The control / DAC / I/O / Counter/Timer base address is BaseAddresses[2] in the
PCI_COMMON_CONFIG structure, while the calibration base address is BaseAddresses[3].

«
...
45
46
47
48
49
...
»

Содержание PCI-AOB16/12















































































Отзывы:

Нет отзывов

Похожие инструкции для PCI-AOB16/12

Бренд: AccessPRO Страницы: 8

Бренд: Hamlet Страницы: 4

Бренд: Gigabyte Страницы: 44

Бренд: Digital Equipment Страницы: 36

Бренд: Ansel Страницы: 41

Бренд: StarTech.com Страницы: 10

SafezoneXID-500

Бренд: LG CNS Страницы: 33

Бренд: AuthenTrend Страницы: 33

Бренд: Schlage Страницы: 2

Бренд: GeoVision Страницы: 202

Allegro USB3-4PM-E

Бренд: Sonnet Страницы: 2

Бренд: Sonnet Страницы: 6

Бренд: Sonnet Страницы: 2

Бренд: Diablotek Страницы: 1

ReSpeaker Core v2

Бренд: SeeedStudio Страницы: 20

Бренд: IDTECK Страницы: 12

Бренд: VideoLogic Страницы: 15

Бренд: LS Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды