4
Revision 2.3
4
2.
Base System Definitions
The following table lists the base system configurations tested for a given validation test
run. Each specific product/system software combination tested is assigned a Base System
Identifier Number. These numbers are used in the lists of supported adapters and
peripherals referenced in the following sections.
The adapters and peripherals specified in this document may or may not have been tested
on all available board/riser combinations that make up the
NSN2U
product family.
However, Kontron will provide support for the adapters and peripherals listed when used
within this family of products
This table is updated when a new test run is performed and a new product/system software
combination was used.
Kontron will only provide support for adapters and peripherals under the specified
operating systems versions with which they were tested The latest version of an
operating system signifies the latest supported version at the time of the actual
test run. Each new release of this document may have a newly supported
release of a given operating system. Previous releases of a supported operating
system may not be tested beyond the basic installation test process.
Base System
Configuration
Identifier #
Board
type
PBA
Number
BIOS
Revision
BMC
Firmware
Revision
ME Firmware
Revision
FRU/SDR
Revision
Notes
1
T5520UR
E24717-601
R0034
00.33
01.01.00.004
(1.10)
FTU_07
Beta
Configuration
2
T5520UR
E24717-606
R0045
00.48
01.01.02.007
(1.12)
FTU_11
Production
3
T5520UR
E24717-750
R0054
00.54
01.01.02.007
(1.12)
FTU_13
Production