Kontron Mungo545, Руководство пользователя

Страница: 55 / 88

50 Mungo545 User’s Manual
First/Second/Third Boot Device
These fields determine the drive that the system searches first for an
operating system. This field determines the drive that the system searches
first for an operating system. These options of First/ Second/ Third Boot
Devices are: Floppy, LS120, HDD-0, SCSI, CD-ROM, HDD-1, HDD-2,
HDD-3, ZIP100, LAN and Disabled.
The First Boot device default setting value is Floppy .
The Second Boot device default setting value is HDD-0 .
The Third Boot device default setting value is LS120 .
Boot Other Device
These fields allow the system to search for an operating system from other
devices other than the ones selected in the First/Second/Third Boot
Device.
Swap Floppy Drive
This item allows you to determine whether or not to enable the swap
Floppy Drive. When enabled, the BIOS swaps floppy drive assignments
so that Drive A becomes Drive B, and Drive B becomes Drive A. By
default, this field is set to
Disabled.
Boot Up Floppy Seek
When enabled, the BIOS will seek whether or not the floppy drive
installed has 40 or 80 tracks. 360K type has 40 tracks while 760K, 1.2M and
1.44M all have 80 tracks. By default, this field is set to
Enabled.
Boot Up NumLock Status
This allows you to activate the NumLock function after you power up the
system. By default, the system boots up with
NumLock On.
Typematic Rate Setting
When disabled, continually holding down a key on your keyboard will
generate only one instance. When enabled, you can set the two typematic
controls listed next. By default, this field is set to
Disabled.
Typematic Rate (Chars/Sec)
When the typematic rate is enabled, the system registers repeated
keystrokes speeds. You can select speed range from 6 to 30 characters per
second. By default, this item is set to
6.