Kontron Mungo545, Руководство пользователя

Страница: 18 / 88

Mungo545 User’s Manual 13
Memory Installation
The Mungo545 single board computer supports one 168-pin DIMM socket
for a maximum total memory of 512MB in SDRAM type. The memory
capacities supported are 64MB, 128MB and 256MB and 512 MB. All
DIMMs must use the same frequency SDRAMs but there are no
restrictions on mixing different DIMM configurations into each DIMM
slot. The system of TM3120-based table shows the possible SDR
SDRAM configuration below.
Installing and Removing DIMMs
To install the DIMM, locate the memory slot on the little board and
perform the following steps:
1. Hold the DIMM so that the two keys of the DIMM align with those on
the memory slot.
2. Gently push the DIMM in an upright position until the clips of the slot
close to hold the DIMM in place when the DIMM touches the bottom
of the slot.
3. To remove the DIMM, press the clips with both hands.
Top View of DIMM Socket
DIMM
Lock
Lock
Lock Lock