Kontron MicroTCA AM5901, Руководство пользователя

Страница: 23 / 28

AM5901 Introduction
ID 1032-0648, Rev. 1.0 Page 1 - 7
P R E L I M I N A R Y
1.4.2 Front Panel
Figure 1-2: AM5901 Front Panel
AM5901
SFP/Lnk
0
1
6
7
12
A B
A
B
C
D
A
B
LED1 (red): Out-of-Service LED
LED2 (red/green/amber): Health LED
HS LED (blue):
The hot swap indicator provides
basic feedback to the user on the
hot swap state of the module. The
HS LED states are
off , short blink ,
long blink , and on .
Module LEDs
FALED12..1 (green): Link signal from the AMC SerDes
ports or the MCMC
Fabric [A] Link LEDs
1..12
ULED0 (green): Input source for the FALED12..1
(Fabric [A] or MCMC)
User LED
0
Serial Connector
Ethernet Connector
MCMC Reset Switch
Connectors/Switch
SFP/Lnk LEDs:
A/B (green): Link signal on the SFP interface
Uplink RJ-45 Connector LEDs:
ACT (green): Ethernet Link/Activity
SPEED (green/orange): Ethernet Speed
SPEED ON (orange):
1000 Mbit
SPEED ON (green): 100 Mbit
SPEED OFF: 10 Mbit
Management RJ-45 Connector LED:
ACT (green): Ethernet Link/Activity
Ethernet Status LEDs