Kontron MicroTCA AM5901, Руководство пользователя

Страница: 20 / 28

Introduction AM5901
Page 1 - 4 ID 1032-0648, Rev. 1.0
P R E L I M I N A R Y
1.2 Board-Specific Information
Due to the comprehensive features of the AM5901, such as high-performance switching fabric
and flexible interconnect topologies, this MCH provides a highly scalable solution not only for
a wide range of telecom and data network applications, but also for highly integrated industrial
environment applications with solid mechanical interfacing.
Some of the AM5901's outstanding features are:
• NXP® LPC2368 microcontroller (MCMC):
• 70 MHz ARM7 CPU
• Ethernet interface
• IPMI
• Watchdog timer
• I²C busses for IPMB usage
• Broadcom BCM5396 Gigabit Ethernet switch:
• 16 SerDes/SGMII ports
• Non-blocking full-wire speed
• Low latency
• Unmanaged layer 2 switch
• Automatic address learning and aging
• 256 kB on-chip packet buffer
• Low power consumption
• MCH interconnection:
• 12 Gigabit Ethernet SerDes connections in Fabric [A]
• 12 IPMB-L interfaces
• One I²C to Carrier FRU
• Two IPMB-0 interfaces
• Full hot swap support
• Four Gigabit Ethernet ports on front I/O routed to the Fabric [A] switch (two of them are
switchable to SFP)
• One Ethernet port on front I/O for management purposes
• One serial port on front I/O (RS-232)
• JTAG interface for debugging and manufacturing purposes
• 3 Module LEDs
• 12 Fabric [A] Link LEDs
• 1 User LED
• Standard temperature range: -5°C to + 55°C
• Double, Full-size AMC form factor module with a single tongue (tongue 1)
• Designed to support the following specifications:
• PICMG
®
AMC.0, Advanced Mezzanine Card Specification R2.0
• PICMG ® MTCA.0 Micro Telecommunications Computing Architecture R1.0
• PICMG
®
MTCA.1 Air-Cooled Rugged MicroTCA Specification R1.0, March 19, 2009
• IPMI - Intelligent Platform Management Interface Specification, v1.5