background image

Contents

MBx406 – 4U Platform User Manual

1

Contents

Introduction.......................................................................................................... 3

Symbols used in this Manual ................................................................................. 4

Important Instructions......................................................................................... 5

Note on the Warranty............................................................................................. 5

Exclusion of Accident Liability Obligation............................................................... 5

Liability Limitation / Exemption from the Warranty Obligation ................................ 5

Safety Instructions .............................................................................................. 6

Operation of Laser Source Devices ....................................................................... 8

Electronic Discharge (ESD) ................................................................................... 8

Grounding Methods........................................................................................... 9

Instructions for the Lithium Battery ........................................................................ 9

FCC Rules ........................................................................................................... 10

Electromagnetic Compatibility.............................................................................. 10

Scope of Delivery............................................................................................... 11

Type Labels and Product Identification................................................................ 11

Product Description .......................................................................................... 12

Front Panel .......................................................................................................... 14

Operating Elements ........................................................................................ 15

LED Indicators................................................................................................. 16

Air Filter Hood Cover....................................................................................... 16

Drive Door ....................................................................................................... 17

Frontal Accessible Drive Bays......................................................................... 17

Rear Panel........................................................................................................... 18

Ports on the Rear Panel .................................................................................. 19

Power Supply Unit........................................................................................... 20

To Padlock the Device .................................................................................... 20

Versions of the Power Supply Unit ...................................................................... 21

Power Cord Connection....................................................................................... 22

AC PSU........................................................................................................... 22

DC PSU .......................................................................................................... 22

Internal Drive Bays .............................................................................................. 23

Motherboard ........................................................................................................ 23

Assembly, Disassembly.................................................................................... 24

Accessing Internal Components .......................................................................... 24

Содержание MBx406











































Отзывы: