Getting Started
KT-RT-BT User’s Manual Version 1.0
www.kontron.com
18
04.02. Charging the Battery
When you use the AC adapter to connect your KT-RT-BT to a power outlet, the standard and
external (optional) battery will automatically begin to recharge.
While the battery is charging, the power LED will be active. When the battery is fully charged, the
power LED is lit a solid green.
1. Flip open the DC-IN cover to expose the DC-IN jack.
Figure 9. Opening the DC-IN Cover
2. Connect the AC adapter to the DC-IN port.
Figure 10. Connecting the AC Adapter
After charging the battery, disconnect the AC adapter and close the DC-IN cover.
1.
Insert one end of the cover first and angle the cover to seat it in place.
2. Push in the cover to seal the DC-IN compartment.
Figure 11. Closing the DC-IN Cover
The DC-IN cover must be inserted correctly to prevent internal damage to the device.