Kontron KFM21_e, Руководство пользователя

Страница: 23 / 35

Installation Instructions
Installation Instructions
Please observe the described hints in the “Safety Instructions”
chapter and the specification listed in the “Main Specification”
chapter.
Instruction for the Mounting
Please take the needed free space on the interface side and
operation field [OSD keys and power On/Off button (if the version
of the KFM21_e is with laterally mounted operating elements)]
into account, before you install the monitor into a control panel or
other cabinet.
You find the description of the interfaces being available in the
“Left Side” section.
Important Instructions!
The monitor KFM21_e has to be installed and operated only by
trained and qualified personal.
Since the device may weigh up to 15 kg, it is advisable to have a
colleague assist in the installation.
Make sure there is sufficient air circulation around the device
when installing the industrial LCD-Monitor KFM21_e.
The openings for cooling on the device (on upper and down side)
must not be obstructed by objects or the like. If the cooling
openings are blocked, this can cause an overheating of the
monitor.
When installing the KFM21_e into a control panel or other
cabinet, leave at least 5 cm of space free around the unit to
prevent the device from possibly overheating!
The control panel or the cabinet must stand firmly in place.
If further stabilization is necessary, then bolt the control panel or
the cabinet to the floor or anchor it on the wall.
The voltage feeds must not be overloaded. Adjust the cabling and
the external overcharge protection to correspond with the
electrical values indicated on the type label.
The type label is located on the back side of the device.
22 21.3" Industrial LCD MonitorKFM21_e – User’s Manual (Version 2.00)