FlatView XXL Monitor – User Guide Rev. 1.0
www.kontron.com
// 23
Rear View
5.2.
Each display size has a specific back panel where the main items are the position of the main items differ The figure
below shows a 55-inch display back panel and describes the main elements.
Figure 8: Rear View
1.
VESA mounting holes (M6)
2.
Control Panel
3.
Two cable lead through for maximum of
up to 6 cables (factory-configured)
4.
Warning label
5.
Protective earth pin
6.
Main power button
7.
Type label
5.2.1.
Back Panel Views
The back panel of the F632 (32-inch), F642 (42-inch) and F6 (55-inch) displays provide factory configured cables led out
of the housing for direct connection. Specific features of each back panel are listed in the table below.
Table 7: Back Panel Mechanical Features - 32”, 42” and 55” Displays
Back Panel View
Features
32”
Rear side
8x VESA mounting holes (M6) safety eyelet 13 mm maximum
depth
1x OSD Control Panel keypad
2x cable lead through (standard - 3 hole lead through)
Top Side
3x barrel hinges
4x VESA mounting holes (M8) with safety eyelet 15 mm
maximum depth, to hang the system
Bottom Side
3x locking screws
1
5
3
2
4
7
6
