Kontron CU 5 -2 Series, Руководство пользователя

Страница: 33 / 44

Control Units CU 5x-2xxx – Rev. 1.A
www.kontron.com // 33
7/ Malfunctions
Table 16: Malfunctions
Malfunction Possible cause Recommended action
No function No or incorrect power supply to
the device Check if the wiring at X1 is correct.
Measure supply voltage.
No image over HDMI Settings in BIOS are not correct Contact the support
Interface function impaired Interface cable not plugged in
correctly Check whether all interface cables are
plugged in correctly and the pin
assignment is correct.
Loss of warranty due to manipulation of the device
Repairs and other manipulations of the device may only be carried out by the manufacturer.
In particular, opening the device is prohibited. Otherwise any warranty will become void.