Kontron CU 5 -2 Series, Руководство пользователя

Страница: 24 / 44

Control Units CU 5x-2xxx – Rev. 1.A
www.kontron.com // 24
Figure 5: Interfaces/Connectors Extension part Back side of the model CU 5x-2x1x
RS232 Connector X8
Table 13: RS232 Connector X8
Pin Signal Type Comment
1 -
2 RxD IN RS232 Receive Data
3 TxD OUT RS232 Transmit Data
4 -
5 GND GND
6 -
7 RTS OUT RS232 Request to Send
8 CTS IN RS232 Clear to Send
9 -
CASE GND GND
Cable (acc. to chapter 2.2/ EMC): max. 3 m, shielded
CAN Connector X9.1
Table 14: CAN Connector X9.1
Pin Signal Type Comment
1 SHIELD SHLD
2 CANH I/O CAN Signal CAN_HIGH
3 CANL I/O CAN Signal CAN_LOW
4 GND_CAN GND
Cable (acc. to chapter 2.2/ EMC): max. 30 m, shielded
Connector Type: Phoenix MCDN 1.5/ 4-G1-3.5 – 1953732
Mating connector: e.g. Phoenix FMC 1.5/ 4-ST-3.5 – 1952283
Associated permissible cable cross-sections:

Conductor cross-section min: 0.2 mm² (corresponds AWG 24)

Conductor cross-section max: 1.5 mm² (corresponds AWG 16)*
*max. conductor cross-section reduced to 0.75 mm 2 for ferrules with plastic ferrule
E1
X6