Kontron CP6930-1, Руководство пользователя

Страница: 36 / 81

www.kontron.com
CP6930-1User Guide
25
3.5.5 Backplane Connectors
The complete CompactPCI connector configuration comprises five connectors named J1 to J5. Their functions are as fol-
lows:
•
J1, J2: management, IPMB and power, PCI is not supported
•
J3, J4 and J5 have rear I/O interface functionality, providing GbE to the backplane or RIO module and an RS232 in-
terface to a RIO module
The board supports signaling voltages V(I/O) of either 3.3 V or 5 V. No keying is required on J1 which designates universal
V(I/O).
For accessing the GbE interfaces signals on connectors J3, J4 and J5 with a rear I/O module, a special backplane is neces-
sary. The CP6930-1 is compatible with all standard 6U CompactPCI passive backplanes with rear I/O support on the system
slot.
3.5.5.1 J1 Connector
•
Power +3.3V, +5.0V, V(I/O)
•
IPMB Power (+5.0V)
•
IPMB 0
•
Hot Swap.
Table 3-11:
Connector J1 Pinout
Pin Row A Row B Row C Row D Row E Row F
25 V_5V_CPCI NC NC V_3V3_CPCI V_5V_CPCI GND
24 NC V_5V_CPCI V_IO_CPCI NC NC GND
23 V_3V3_CPCI NC NC V_5V_CPCI NC GND
22 NC GND V_3V3_CPCI NC NC GND
21 V_3V3_CPCI NC NC NC NC GND
20 NC GND V_IO_CPCI NC NC GND
19 V_3V3_CPCI NC NC GND NC GND
18 NC GND V_3V3_CPCI NC NC GND
17 V_3V3_CPCI IPMB0_SCL IPMB0_SDA GND NC GND
16 NC GND V_IO_CPCI NC NC GND
15 V_3V3_CPCI NC NC CPCI_BD_SEL# NC GND
14
Key Area
13
12
11
NC NC NC GND NC GND
10 NC GND V_3V3_CPCI NC NC GND
9 NC NC NC GND NC GND
8 NC GND V_IO_CPCI NC NC GND
7 NC NC NC GND NC GND
6 NC NC V_3V3_CPCI NC NC GND
5 NC NC CPCI_PCI_RST# GND NC GND
4 V_5V_IPMB_PWR CPCI_HEALTHY# V_IO_CPCI NC NC GND
3 NC NC NC V_5V_CPCI NC GND
2 NC V_5V_CPCI NC NC NC GND
1 V_5V_CPCI NC NC NC V_5V_CPCI GND