www.kontron.com
CP6930-1 User Guide
30
4
Software Description
Software on the CP6930-1 includes the following parts:
•
Bootloader
•
initrd (including rootFS and kernel
•
Application software (FASTPATH switching SW)
•
IPMI FW
The Software accomplishes operation of the switching hardware and is therefore also referenced as firmware. It is pre-
installed on the system and can only be updated by a dedicated update procedure. This manual only describes bootloader,
its self tests and IPMI Firmware and introduces the update procedure.
For additional information of system configuration using CLI commands refer to documentation “CP6930-1 CLI Reference
Manual”.
4.1
Supported RFCs
The Software supports the following standards and RFCs.
4.1.1
FASTPATH Management
Core Features
•
RFC 854 — Telnet
•
RFC 855 — Telnet option specifications
•
RFC 1155 — SMI v1
•
RFC 1157 — SNMP
•
RFC 1212 — Concise MIB definitions
•
RFC 1867 — HTML/2.0 forms with file upload extensions
•
RFC 1901 — Community-based SNMP v2
•
RFC 1908 — Coexistence between SNMP v1 and SNMP v2
•
RFC 2068 — HTTP/1.1 protocol as updated by draft-ietf-http-v11-spec-rev-03
•
RFC 2271 — SNMP framework MIB
•
RFC 2295 — Transparent content negotiation
•
RFC 2296 — Remote variant selection; RSVA/1.0 state management cookies — draft-ietf-http-state-mgmt-05
•
RFC 2576 — Coexistence between SNMP v1, v2, and v3
•
RFC 2578 — SMI v2
•
RFC 2579 — Textual conventions for SMI v2
•
RFC 2580 — Conformance statements for SMI v2
•
RFC 2616 — HTTP/1.
•
RFC 3410 — Introduction and Applicability Statements for Internet Standard Management Framework
•
RFC 3411 — An Architecture for Describing SNMP Management Frameworks
•
RFC 3412 — Message Processing & Dispatching
•
RFC 3413 — SNMP Applications
•
RFC 3414 — User-Based Security Model