www.kontron.com
CP6924-1-RA-A User Guide
34
4
Software Description
Software on the CP6924-1-RA-A includes the following parts:
•
Bootloader
•
initrd (including rootFS, kernel)
•
Application software (FASTPATH switching SW)
•
IPMI Firmware
The Software accomplishes operation of the switching hardware and is therefore also referenced as firmware. It is pre-
installed on the system and can only be updated by a dedicated update procedure. This manual describes bootloader, Linux
rootfs/kernel and IPMI firmware, last chapter introduces the update procedures.
For additional information of system configuration using CLI commands refer to documentation “CP6924-1-RA-A CLI Refer-
ence Manual”.
4.1
Supported RFCs
The Software supports the following standards and RFCs.
4.1.1
FASTPATH Management
Core Features
•
RFC 854 — Telnet
•
RFC 855 — Telnet option specifications
•
RFC 1155 — SMI v1
•
RFC 1157 — SNMP
•
RFC 1212 — Concise MIB definitions
•
RFC 1867 — HTML/2.0 forms with file upload extensions
•
RFC 1901 — Community-based SNMP v2
•
RFC 1908 — Coexistence between SNMP v1 and SNMP v2
•
RFC 2068 — HTTP/1.1 protocol as updated by draft-ietf-http-v11-spec-rev-03
•
RFC 2271 — SNMP framework MIB
•
RFC 2295 — Transparent content negotiation
•
RFC 2296 — Remote variant selection; RSVA/1.0 state management cookies — draft-ietf-http-state-mgmt-05
•
RFC 2576 — Coexistence between SNMP v1, v2, and v3
•
RFC 2578 — SMI v2
•
RFC 2579 — Textual conventions for SMI v2
•
RFC 2580 — Conformance statements for SMI v2
•
RFC 2616 — HTTP/1.
•
RFC 3410 — Introduction and Applicability Statements for Internet Standard Management Framework
•
RFC 3411 — An Architecture for Describing SNMP Management Frameworks
•
RFC 3412 — Message Processing & Dispatching
•
RFC 3413 — SNMP Applications
•
RFC 3414 — User-Based Security Model
