manualshive.com logo in svg

Kontron CP6003-SA, Руководство пользователя

Поделиться
Скачать
Kontron CP6003-SA Скачать руководство пользователя страница 13

CP6003-SA

Preface

ID 1044-9757, Rev. 2.0

Page xiii

P R E L I M I N A R Y

Proprietary Note

This document contains information proprietary to Kontron. It may not be copied or transmitted
by any means, disclosed to others, or stored in any retrieval system or media without the prior
written consent of Kontron

 

or one of its authorized agents.

The information contained in this document is, to the best of our knowledge, entirely correct.
However, Kontron cannot accept liability for any inaccuracies or the consequences thereof, or
for any liability arising from the use or application of any circuit, product, or example shown in
this document.

Kontron reserves the right to change, modify, or improve this document or the product
described herein, as seen fit by Kontron without further notice.

Trademarks

Kontron, the 

PEP

 logo and, if occurring in this manual, “CXM” are trademarks owned by

Kontron, Kaufbeuren (Germany). In addition, this document may include names, company
logos and trademarks, which are registered trademarks and, therefore, proprietary to their
respective owners.

Environmental Protection Statement

This product has been manufactured to satisfy environmental protection requirements where
possible. Many of the components used (structural parts, printed circuit boards, connectors,
batteries, etc.) are capable of being recycled.

Final disposition of this product after its service life must be accomplished in accordance with
applicable country, state, or local laws or regulations.

Содержание CP6003-SA



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды