Kontron CP6001-R3, Руководство пользователя

Страница: 26 / 30

Introduction CP6001-R3
Page 1 - 10 ID 1027-2047, Rev. 1.0
Interfaces
CCPMC CMC / PMC P1386 / Draft 2.4a and CCPMC VITA 20-2001 (R2005) compliant
mezzanine interface:
•
CCPMC module support
•
Jn1, Jn2 and Jn4 PCI mezzanine connectors for standard CCPMC
modules
•
32-bit / 66 MHz PCI/PCI-X interface
•
Rear I/O supported through the CompactPCI connector J4
•
Supported voltages: 3.3 V, 5 V, +12 V, and -12 V
•
Supports 3.3 V signaling voltage (VI/O)
Keyboard and Mouse Keyboard and mouse are supported on rear I/O
•
USB Support
•
PS/2 (keyboard and mouse)
Mass Storage EIDE ATA:
• One onboard ATA interface for the soldered CompactFlash
• Soldered CompactFlash (true IDE mode, UDMA and Multiword DMA
support)
SATA: Integrated Serial ATA Host Controllers
• Provide independent DMA operation on 4 channels to rear I/O
• Data transfer rates up to 300 MB/s
Sockets
Onboard Connectors
•
CCPMC connectors J7 to J9 (Jn1, Jn2 and Jn4)
•
CompactPCI Connectors J1 to J5
•
J6 - factory use only
HW Monitoring
Watchdog Software configurable Watchdog generates IRQ or hardware reset.
Thermal-Related
Functions Thermal monitor and control:
•
Onboard temperature sensors:
•
Temp1 sensor
•
Temp2 sensor
•
Temperature sensor integrated in the Super I/O
•
Processor thermal monitoring and regulation:
•
Intel
®
Thermal Monitor (TM1 and TM2)
•
Intel
®
SpeedStep
®
•
Catastrophic cooling failure sensor
•
Two Digital Thermal Sensors (one per core)
•
Thermal Diode Sensor
•
Conduction cooling
System Monitor SuperIO integrated hardware monitor (SCH3112) for supervision of:
•
Two fan speed inputs
•
Board temperature
IPMI Baseboard Management Controller (BMC) that supports two keyboard
controller-style interfaces (KCS) compliant with:
•
IPMI specification v1.5
•
PICMG 2.9 specification
IPMI supports two IPMB busses via the J1 and J2 connectors.
Table 1-1: CP6001-R3 Main Specifications (Continued)
CP6001-R3 SPECIFICATIONS